HARDWARE FEATURES
| Interface | 1* 10/100Mbps Ethernet WAN Port (Passive PoE In)
1* 10/100Mbps Ethernet LAN Port 1* Reset Button 1* S(Slave)/M(Master) toggle switch |
| Power Supply | Passive Power over Ethernet through WAN Port, or DC Jack In (12V 1A) |
| LED Indicator | Power, LAN, WAN, Master/Slave, Wi-Fi Channel |
| Antenna Type | Built-in 12dBi High Performance Panel Antenna
Beam Width: 60° |
| Enclosure | Outdoor IP65 Dust-tight Water-Resistant Protection |
WIRELESS FEATURES
| Wireless Standards | IEEEE 802.11 b/g/n |
| Frequency | 2.4GHz N |
| Data Rate | Up to 300Mbps |
| Transmit Power | Up to 20dBm
Note: maximum transmission power may vary across different countries subject to local regulatory and regions in which the device is used |
| Transmission Distance | Up to 2Km (in Wireless Bridge mode) * |
| Multiple SSID Support | Up to 4 Multiple SSID |
| Physical Master/Slave Configuration |
Configurable through S(Slave)/M(Master) toggle switch in the device (only for Wireless Bridge/WDS mode) |
| Wi-Fi Analyser | Supported |
SOFTWARE FEATURES
| Wireless Configurations |
2.4GHz a/an/ac modes
Automatic / Static Channel Selection Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption SSID Broadcast Enable/Disable Multi-SSID Wireless MAC Address Filter |
| Operation Mode | Wireless Bridge/WDS, Gateway, Wi-Fi Repeater, Wireless AP |
| WAN Connection Type | Dynamic IP, Static IP, PPPoE |
| Management | Web-based http management (local / remote)
Device discoverable through PROLiNK Wireless Controller (when WAN mode is set to get DHCP from AC) System Log |
| System Tools | Run-time Wireless Traffic Connection Rate
Wireless Analyser Connected Clients information |
DIMENSION & WEIGHT
| Dimension | 168 x 88 x 57.6 mm |
| Weight | 235g |
SYSTEM REQUIREMENTS
| OS Supported | Microsoft Windows 7/10
MAC 10.6 and above Linux |
PACKAGE CONTENT
| Outdoor Wireless Bridge CPE/AP
Ethernet Cable Quick Installation Guide 24V 0.5A Passive POE Injector Mounting Kit |
Certifications
