Master II Series (1P/1P)

PRO800-ES/EL SERIES 1-3KVA

True double-conversion online UPS

Wide input voltage range
(110-300 VAC, 55-150 VAC)

Input power factor correction 0.99

Programmable power management outlets

Emergency power off function (EPO)

Very high surge immunity up to 7KV, 13KA, 1300J

MODEL

GENERAL

UPS Type Tower
Phase Single phase with ground
Rating (VA) 1000
Nominal Power (W) 900
Standard Model

Dimension (mm)

 397 x 145 x 220 (D x W x H)
Weight (kg) 12.5
Long-run Model

Dimension (mm)

 397 x 145 x 220 (D x W x H)
Weight (kg) 5.8

INPUT

Connection Type IEC 320-C14
Nominal Voltage 200/208/220/230/240 VAC
Voltage Range 110-300 VAC (Based on load at 50%)

160-300 VAC (Based on load at 100%)
Frequency Range 40 Hz ~ 70 Hz
Power Factor ≧0.99
THDi ≦ 5% @100~130VAC or 205-245VAC

THDU < 1.6% @ input and full linear load condition with battery fully charged

OUTPUT

Connection Type 4 x IEC 320-C13
Nominal Voltage 200/208/220/230/240 VAC
Voltage Regulation ±1%
Frequency Range (Synchronized Range) 47~53 Hz or 57~63 Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
Current Crest Ratio 3:1
Harmonic Distortion ≦2% THD (Linear load)

≦4% THD (Non-linear load)

ALARM & INDICATORS

Battery Mode Sounding every 4 second
Low Battery Sounding every second
Overload Sounding twice every second
Fault Continuously sounding
LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault

CONNECTIVITY, CONTROL & MONITORING

Front panel Status LED, Function keys,LCD display
Communication Smart RS232*

USB Port

Emergency Power Off (EPO)

BATTERY

Standard Model

Type

 12V / 7Ah
Numbers 3
Typical Recharge Time  4 hours recover to 90% capacity
Long-run Model

Type

 Depending on the capacity of external batteries
Numbers 3
Charging Current (max) 1A/2A/4A/6A/8A (Selectable via LCD setting)

REAR PANEL

  1. Programmable outlets: connect to non-critical loads
  2. Output receptacles: connect to mission-critical loads
  3. AC input
  4. Input circuit breaker
  5. Network/Fax/Modem surge protection
  6. Emergency power off function connector (EPO)
  7. USB communication port
  8. RS-232 communication port
  9. Intelligent slot
  10. External battery connection (Only available for L model)
  11. Output terminal
  12. Output circuit breaker
  13. Cooling fan

GENERAL

UPS Type Tower
Phase Single phase with ground
Rating (VA) 1500
Nominal Power (W) 1350
Standard Model

Dimension (mm)

 397 x 145 x 220 (D x W x H)
Weight (kg) 13.8
Long-run Model

Dimension (mm)

 397 x 145 x 220 (D x W x H)
Weight (kg) 5.8

INPUT

Connection Type IEC 320-C14
Nominal Voltage 200/208/220/230/240 VAC
Voltage Range 110-300 VAC (Based on load at 50%)

160-300 VAC (Based on load at 100%)
Frequency Range 40 Hz ~ 70 Hz
Power Factor ≧0.99
THDi ≦ 5% @100~130VAC or 205-245VAC

THDU < 1.6% @ input and full linear load condition with battery fully charged

OUTPUT

Connection Type 4 x IEC 320-C13
Nominal Voltage 200/208/220/230/240 VAC
Voltage Regulation ±1%
Frequency Range (Synchronized Range) 47~53 Hz or 57~63 Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
Current Crest Ratio 3:1
Harmonic Distortion ≦2% THD (Linear load)

≦4% THD (Non-linear load)

ALARM & INDICATORS

Battery Mode Sounding every 4 second
Low Battery Sounding every second
Overload Sounding twice every second
Fault Continuously sounding
LCD  Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault

CONNECTIVITY, CONTROL & MONITORING

Front panel Status LED, Function keys, LCD display
Communication Smart RS232*

USB Port

Emergency Power Off (EPO)

BATTERY

Standard Model

Type

 12V / 9Ah
Numbers 3
Typical Recharge Time  4 hours recover to 90% capacity
Long-run Model

Type

 Depending on the capacity of external batteries
Numbers 3
Charging Current (max) 1A/2A/4A/6A/8A (Selectable via LCD setting)

REAR PANEL

  1. Programmable outlets: connect to non-critical loads
  2. Output receptacles: connect to mission-critical loads
  3. AC input
  4. Input circuit breaker
  5. Network/Fax/Modem surge protection
  6. Emergency power off function connector (EPO)
  7. USB communication port
  8. RS-232 communication port
  9. Intelligent slot
  10. External battery connection (Only available for L model)
  11. Output terminal
  12. Output circuit breaker
  13. Cooling fan

GENERAL

UPS Type Tower
Phase Single phase with ground
Rating (VA) 2000
Nominal Power (W) 1800
Standard Model

Dimension (mm)

 421 x 190 x 318 (D x W x H)
Weight (kg) 25.8
Long-run Model

Dimension (mm)

 421 x 190 x 318 (D x W x H)
Weight (kg) 12

INPUT

Connection Type IEC 320-C14
Nominal Voltage 200/208/220/230/240 VAC
Voltage Range 110-300 VAC (Based on load at 50%)

160-300 VAC (Based on load at 100%)
Frequency Range 40 Hz ~ 70 Hz
Power Factor ≧0.99
THDi ≦ 5% @100~130VAC or 205-245VAC

THDU < 1.6% @ input and full linear load condition with battery fully charged

OUTPUT

Connection Type 8 x IEC 320-C13
Nominal Voltage 200/208/220/230/240 VAC
Voltage Regulation ±1%
Frequency Range (Synchronized Range) 47~53 Hz or 57~63 Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
Current Crest Ratio 3:1
Harmonic Distortion ≦2% THD (Linear load)

≦4% THD (Non-linear load)

ALARM & INDICATORS

Battery Mode Sounding every 4 second
Low Battery Sounding every second
Overload Sounding twice every second
Fault Continuously sounding
LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault

CONNECTIVITY, CONTROL & MONITORING

Front panel Status LED, Function keys, LCD display
Communication Smart RS232*

USB Port

Emergency Power Off (EPO)

BATTERY

Standard Model

Type

 12V / 7Ah
Numbers 6
Typical Recharge Time  4 hours recover to 90% capacity
Long-run Model

Type

 Depending on the capacity of external batteries
Number 6
Charging Current (max) 1A/2A/4A/6A/8A (Selectable via LCD setting)

REAR PANEL

  1. Programmable outlets: connect to non-critical loads
  2. Output receptacles: connect to mission-critical loads
  3. AC input
  4. Input circuit breaker
  5. Network/Fax/Modem surge protection
  6. Emergency power off function connector (EPO)
  7. USB communication port
  8. RS-232 communication port
  9. Intelligent slot
  10. External battery connection (Only available for L model)
  11. Output terminal
  12. Output circuit breaker
  13. Cooling fan

GENERAL

UPS Type Tower
Phase Single phase with ground
Rating (VA) 3000
Nominal Power (W) 2700
Standard Model

Dimension (mm)

 421 x 190 x 318 (D x W x H)
Weight (kg) 27
Long-run Model

Dimension (mm)

 421 x 190 x 318 (D x W x H)
Weight (kg) 13.8

INPUT

Connection Type IEC 320-C20
Nominal Voltage 200/208/220/230/240 VAC
Voltage Range 110-300 VAC (Based on load at 50%)

160-300 VAC (Based on load at 100%)
Frequency Range 40 Hz ~ 70 Hz
Power Factor ≧0.99
THDi ≦ 5% @100~130VAC or 205-245VAC

THDU < 1.6% @ input and full linear load condition with battery fully charged

OUTPUT

Connection Type 6 x IEC 320-C13

Terminal
Nominal Voltage 200/208/220/230/240 VAC
Voltage Regulation ±1%
Frequency Range (Synchronized Range) 47~53 Hz or 57~63 Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
Current Crest Ratio 3:1
Harmonic Distortion ≦2% THD (Linear load)

≦4% THD (Non-linear load)

ALARM & INDICATORS

Battery Mode Sounding every 4 second
Low Battery Sounding every second
Overload Sounding twice every second
Fault Continuously sounding
LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault

CONNECTIVITY, CONTROL & MONITORING

Front panel Status LED, Function keys, LCD display
Communication Smart RS232*

USB Port

Emergency Power Off (EPO)

BATTERY

Standard Model

Type

 12V / 9Ah
Numbers 6
Typical Recharge Time  4 hours recover to 90% capacity
Long-run Model

Type

 Depending on the capacity of external batteries
Number 6
Charging Current (max) 1A/2A/4A/6A/8A (Selectable via LCD setting)

REAR PANEL

  1. Programmable outlets: connect to non-critical loads
  2. Output receptacles: connect to mission-critical loads
  3. AC input
  4. Input circuit breaker
  5. Network/Fax/Modem surge protection
  6. Emergency power off function connector (EPO)
  7. USB communication port
  8. RS-232 communication port
  9. Intelligent slot
  10. External battery connection (Only available for L model)
  11. Output terminal
  12. Output circuit breaker
  13. Cooling fan

DOWNLOAD

Document Date Version
Icon

UPS Catalogue 2023 (Ver 1.0)

1 file(s) 6.64 MB
Download
- -
Icon

Datasheet

1 file(s) 1,022.43 KB
Download
2021-05-19 1.00
Icon

User Guide

1 file(s) 1.37 MB
Download
2020-11-27 2.00

You may also like…

Master II Series (1P/1P) - Rack/Tower

Master II Series (1P/1P) – Rack/Tower

PRO800-QRS/QRL SERIES 1-10KVA

Master II+ Series (3P/3P)

Master II+ Series (3P/3P)

PRO83300-ES/EL SERIES 10-30KVA

Master II Series (1P/1P)

Master II Series (1P/1P)

PRO800-QS/QL SERIES 1-10KVA

Master II+ Series (3P/1P) - Rack

Master II+ Series (3P/1P) – Rack

PRO83100-ERS/ERL SERIES 10-20KVA